Three way brass ball valve with connection for actuator
Diameters from DN015 - 1/2" to DN050 - 2"
Threaded ends:
● M/M/M for union ends (ISO228/1) up to DN≤32
(M threaded union ends kit acc. ISO 228/1 on request)
● F/F/F threaded (ISO228/1) for DN40 and DN50
Actuator connection according to ISO 5211 (F03/F05)
Different connections available on request
Air testing according to EN12266-1
Available in the following versions:
● 32TT, diverting valve with one input and two outputs
● 32TG, mixing valve with two inputs and one output
(also usable as distributing valve)
Gost compliant
PN40
Working conditions:
● Water: -15°C to +120°C
below 0°C only for water with added antifreeze fluids
over 100°C only for water with added anti-boiling fluids
(Glycolic-ethylene/glycolic-propylene mix >20%, ≤50%)
The EZMotion product line includes brass, polypropylene and steel ball valves with flanged connections for actuators according to the ISO 5211 norm.
A wide selection of electric and pneumatic actuators with compact dimensions complete our range. Each actuator line is available in many different configurations (power supply, control type, signal outputs) and can be used on each EZMotion valve.
This flexibility allows one to always find the right valve/actuator combination which is best suited for each application.
Electric actuator with ISO 5211 connection
Replaced by SLOOP II model
Double insulated cover according to CEI/EN 60335-1
Max torque 14Nm, working torque 5Nm
Travel 90° in 60 seconds
F05-□9 mm connection
(□11 mm stem connections on request)
With 60 cm electric wire
CE compliant
Enclosure protection IP54
Power supply 230VAC, 50Hz/60Hz
2 point (ON/OFF) control
Power 3,5W
Working temperature: 0° to +55°C
Electric actuator with ISO 5211 connection
Double insulated cover according to CEI/EN 60335-1
Torque 14Nm, travel 90° in 60 seconds
Manual override
F05 connection, stem connection □9 mm or □11 mm)
With 60 cm electric wire
(80 cm for versions with 2° switch and phase)
Enclosure protection IP54
CE compliant
Power supply 50Hz/60Hz, versions for 230VAC or 24VAC
2 point (ON/OFF) or 3 point control
With auxiliary limit switch
ON/OFF ver. with 2° switch and phase on open available
Power 3,5W
Working temperature: 0° to +55°C
Two way brass ball valve with connection for actuator
Diameters from DN015 - 1/2" to DN050 - 2"
Threaded ends:
● F/M with union ends (ISO228/1) up to DN≤32
● F/F (ISO228/1) for DN40 and DN50
Actuator connection according to ISO 5211 (F03/F05)
Different connections available on request
Air testing according to EN12266-1
Gost compliant
PN40
Working conditions:
● Water: -15°C to +120°C
below 0°C only for water with added antifreeze fluids
over 100°C only for water with added anti-boiling fluids
(Glycolic-ethylene/glycolic-propylene mix >20%, ≤50%)